Barrie Boom Lift License

Barrie Boom Lift License - Just fully licensed individuals must operate an aerial boom lift. Qualification could be obtained through a combination of sessions in the classroom and practical training with the particular kind of aerial lift which will be utilized on the job. A License is needed for anybody who works on or operates an aerial boom lift.

Different kinds of vehicle-mounted aerial devices consist of extensible boom platforms, aerial ladders, articulating boom platforms, vertical towers, and whatever combination of these kinds.

When using a boom lift, there are several basic safety rules that apply to all boom lifts. Safety of the worker is a top priority whilst they are working within the basket. The worker should at all times have on a body harness and lanyard, connecting it to the basket or boom. Never tie off to an adjacent pole, structure, or equipment. Staff must stand on the basket floor, and never climb or sit on the edge of the basket. The manufacturer's load restrictions should be followed.

Aerial lift operators must be authorized to use the machinery. The operator must be familiar with all the aspects of the device and should have access to the manufacturers guidebook which should be kept in the lift. Operators are responsible for ensuring that safety procedures are followed in operating the lift. Testing lift controls everyday must be done. Position outriggers and set brakes (if they are used) on a stable surface or on pads. When working on a slope, use wheel chocks.

Never move an aerial lift truck with an elevated boom while workers are within the basket. Articulating boom and extensible boom platforms made use of as personnel carriers must have accessible, plainly marked, upper controls. Except in emergency cases, lower controls must not be utilized to override upper controls unless the individual inside the lift gives consent.

Do not wear pole or tree climbers shall whilst working from an aerial lift.
Do not alter the insulated portion of the aerial lift.
Ensure that the booms are thoroughly checked, that the machinery is properly cradled and the outriggers are in the stowed position prior to moving.
When operating a boom lift next to power lines, ensure the lines are di-electrically tested based on local regulations.

Click to Download the pdf